ENVIROSEAL PLUS is a water-based penetrating sealer designed for use on most porous masonry surfaces such as concrete or clay pavers, sandstone, limestone, travertine and re-constituted products. ENVIROSEAL PLUS has been developed to avoid the strong odours associated with the use of solvent based sealers.

ENVIROSEAL PLUS can also be used on a damp paver or as a pre-seal prior to grouting.

• Always clean up spills immediately.
• Do not seal under 10°C or over 30°C.
• Always wear Personal Protective Equipment (PPE) – A minimum requirement of Safety Glasses, Mask, Gloves and Boots.
• Apply a minimum of 2 thin coats to a clean, dry surface with a LAMBSWOOL APPLICATOR or VITON SEAL SPRAYER. Apply first coat, then apply second whilst the first is still damp to ensure good penetration of the second coat. 
• Coverage approx. 5-15 m2 per litre, per coat. The number of coats and coverage depends on the porosity of the surface.
• Resealing required every 1-2 years.
• After sealing it is recommended to carry out routine cleaning with Environex REFRESH.
• Always test first.

Before applying refer to product packaging for detailed application, safety and after-care instructions.