Endure is a "one part" spirit/solvent based sealer for use in the sealing of slate, sandstone, concrete and clay pavers. It protects the paver colour and protects against oils and most colour stains. Gives a glossy, "wet look" finish.

• Do not seal under 10°C or over 30°C.
• Always wear Personal Protective Equipment (PPE) – A minimum requirement of Safety Glasses, Mask, Gloves and Boots.
• Apply 2-3 thin coats to a clean, dry surface with a lambswool applicator or Viton seal sprayer (if sprayed, dilute with 4 litres of Environex CYCLONE per 20 litres of Endure). 
• Coverage approx. 10m2 per litre, per coat. The number of coats and coverage depends on the porosity of the surface.
• It is recommended to only use Environex REFRESH pH neutral detergent for daily or weekly maintenance.
• Always test first.

Before applying refer to product packaging for detailed application, safety and after-care instructions.